Effect of Different Voltages on Electrochemical Properties of Aluminum Alloy for Lithium Battery

Authors

  • Zhisheng Wang College of transportation Engineering, Xinjiang Vocational University of Technology, Kashgar, Xinjiang, China

DOI:

https://doi.org/10.6911/WSRJ.202611_12(11).0002

Keywords:

Electrochemical performance, lithium battery, oxidation treatment.

Abstract

In this paper, aluminum alloy as the research object, using SEM, electrochemical and XRD methods to study the effect of different voltage on the electrochemical properties of aluminum alloy for Lithium Battery. It can be observed that as the voltage increases or decreases, the surface morphology of the aluminum alloy will undergo certain changes. For instance, an excessively high voltage will lead to the occurrence of surface damage, while a too low voltage will also exhibit corresponding change characteristics. Voltages outside the reasonable range are prone to cause negative effects on the electrochemical performance. After undergoing reasonable voltage treatment, the surface morphology and electrochemical performance of the aluminum alloy will exhibit relatively positive effects, thereby enhancing its electrochemical performance as an electrode for lithium-ion batteries.

Downloads

Download data is not yet available.

References

[1] Lu, Y., Rong, X., Hu, Y. S., Li, H., & Chen, L. (2019). Research and development of advanced battery materials in China. Energy Storage Materials, 23, 144–153. [https://doi.org/10.1016/j.ensm.2019.05.019](https://doi.org/10.1016/j.ensm.2019.05.019).

[2] Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019). Theoretical versus Practical Energy: A Plea for More Transparency in the Energy Calculation of Different Rechargeable Battery Systems. Advanced Energy Materials, 9(6), 1803170. https://doi.org/10.1002/aenm.201803170

[3] Heinz, A., Haszler, A., Keidel, C., Moldenhauer, S., Benedictus, R., & Miller, W. S. (2000). Recent development in aluminium alloys for aerospace applications. Materials Science & Engineering A, 280(1), 102–107. https://doi.org/10.1016/S0921-5093(99)00674-7

[4] Garcia-Heras, M., Jimenez-Morales, A., Casal, B., Galván, J. C., Radzki, S., & Villegas, M. A. (2004). Preparation and electrochemical study of cerium–silica sol–gel thin films. Journal of Alloys & Compounds, 380(1–2), 219–224.

[5] Almasi Kashi, M., Ramazani, A., Raoufi, M., & Karimzadeh, A. (2010). Self-ordering of anodic nanoporous alumina fabricated by accelerated mild anodization method. Thin Solid Films, 518(23), 6767–6772.

[6] Liu, J. H., Li, M., Li, S. M., & Huang, M. (2009). Effect of the microstructure of Al 7050-T7451 on anodic oxide formation in sulfuric acid. International Journal of Minerals, Metallurgy and Materials, 16(4), 432–438. https://doi.org/10.1016/S1674-4799(09)60076-5

[7] Patermarakis, G. (2006). Aluminium anodising in low acidity sulphate baths: growth mechanism and nanostructure of porous anodic films. Journal of Solid State Electrochemistry, 10, 211–222. https://doi.org/10.1007/s10008-005-0665-7

[8] Fan, L.-Z., He, H., & Nan, C.-W. (2021). Tailoring inorganic-polymer composites for the mass production of solid-state batteries. Nature Reviews Materials, 6, 1003–1019. https://doi.org/10.1038/s41578-021-00320-0

[9] Wang, Z. (2022). Preparation of ultra-thin polymer solid electrolytes and their performance in all-solid-state lithium batteries [Doctoral dissertation]. University of Chinese Academy of Sciences.

Downloads

Published

2026-11-17

Issue

Section

Articles

How to Cite

Wang, Z. (2026). Effect of Different Voltages on Electrochemical Properties of Aluminum Alloy for Lithium Battery . World Scientific Research Journal, 12(11), 11-16. https://doi.org/10.6911/WSRJ.202611_12(11).0002